Best Table Saw Blade Reviews and Buyer Guide 2019

Oshlun SDS-0630 6-Inch 30 Tooth Stack Dado Set

Best Table Saw BladeA table saw is an essential tool to use in woodworking projects. However, the success of the tool depends on the type of blade that you choose to use. In this comprehensive guide, I intend to help you choose the best table saw blade. This is what will make it easier for you to achieve the desired cuts.

The type of material that you are cutting as well as the table saw model you have will determine the blade that you should use. Since there are many blades, allow me to share some crucial details to help you choose the right blade.

Types of Saw Blade

If your searching for the best table saw blade, you should note that there are different categories of blades. Each type of blade has its own unique use. We will look at the 4 main types of blades, which are:  

  1. Ripping blades
  2. Crosscut blades
  3. Combination blades
  4. Composite blades
  • Ripping Blades

Ripping blades are used for ripping task. These come with about 20 to 30 teeth and they have very large gullets in between the teeth. This is how they are able to remove a lot of material with each single pass, giving you faster cuts.

  • Crosscut Blades

The crosscut blades, on the other hand, have more teeth about 3 times those of ripping blades. These are designed to give you clean and neat cuts. The blade will be effective when you want to cut across the grain, which is referred to as crosscutting.

  • Combination Blades

If you are looking for a blade with both crosscutting and ripping capabilities, this is a perfect choice. These are for general use and will be ideal for you if you need both crosscutting and ripping. They are not as effective as the crosscut or rip blades but will serve the purpose.

  • Composite Blades

The composite blades will be useful if you need to make cuts of other materials besides lumber. You will use this blade to cut plywood and MDF among other materials. There are different types of blades in this category and you get to pick the one for your specific needs.

  • Specialized Blades

Besides the 4 main categories of blades, there are some blades that are designed for special functions. A good example is the dado stacks, which are useful for dado cuts. If you need to make dado cuts, you will need such specialized blades.

Which Saw Blade Should I Buy?

Having a table saw is a great achievement and this makes your work easier. However, you need to also consider the type of blade that you are having, depending on the cuts that you want to achieve. The wrong blade is one of the reasons why table saws cause accidents.

The type of blade that you will buy depends on the type of cuts and the materials that you need to cut. We have looked at the different types of blades on the market, and you should pick one that serves your specific needs. I will go ahead and share critical information to help you get the best table saw blade.

What’s The Best Table Saw Blade On The Market?

It is true that there are so many different types of blades and also they are various models. This is a good thing as it allows you to make a choice. However, the downside of this is that it can be quite confusing. To help you in this end, I have picked some of the best models and I am sure this will make it easier for you to pick the best table saw blade.

Image Product Size Price
Kreg KMS7102 Table Saw Precision Miter Gauge System Freud 10″ x 40T Next Generation Premier Fusion Blade 10" $$ Check Price
Incra MITERV27 Miter V27 Miter Gauge Oshlun SDS-0630 6-Inch 30 Tooth Stack Dado Set 6" $$ Check Price
Incra MITER5000 Miter 5000 Table Saw Miter Gauge Forrest WW10407100 Woodworker II 10-Inch 40-tooth 10" $$$ Check Price
DELTA Deluxe Miter Gauge DEWALT DW7670 8-Inch 24-Tooth Stacked Dado Set 8" _ Check Price

Freud 10″ x 40T Next Generation Premier Fusion General Purpose Blade for Crosscuts (3/8″ to 3-1/2″) & Rips (3/4″ to 1-1/2″) wood, laminate, veneered plywood, hardwoods & melamine. (P410)

Freud 10" x 40T Next Generation Premier Fusion General Purpose BladeThis is an amazing general purpose blade, which means that you can use it for both rip and crosscuts. It comes with special carbide brazing, which is combined with carbide blend. You can be sure that the 10-inch blade will also give you a clean cut. It has 40 teeth, which are meant to handle any cutting task with ease. This is a perfect example of a combination blade and is effective in making cuts.

The blade tensioning is quite remarkable and makes it rigid. This means that it will not warp or bend when you are making cuts and this ensures all cuts are accurate. There Hi-ATB teeth, which have side-grind geometry and this is what assures you of exceptional performance. Additionally, the blade comes with an anti-vibration feature, which makes it the best table saw blade.

As for durability, this is a blade that is laser cut from high-quality steel. The Perma-Shield coating is an additional advantage as it is non-stick. This reduces friction and ultimately, there will not heat buildup when using the blade for extended hours.

Freud 10 Inch General Purpose Blade Features

  • The blade has anti-vibration slots on the body, which reduce any movement during use.
  • This is a combination blade that allows you to make both crosscuts and rip cuts.
  • It is made from heavy gauge steel, which is laser cut, giving you stability and longevity.
  • The sharp teeth will ensure that you have a smooth finish as they have exceptional edge retention.
  • You do not have to worry about heat buildup, thanks to the Perma-Shield coating, which is non-stick, reducing any friction.

Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade with 5/8-Inch Arbor

Forrest WW10407100 Woodworker II 10-Inch 40-tooth ATB .100 Kerf Saw Blade The Forrest WW10407100 is another incredible blade that you may want to consider. One of the features that make this blade worth considering is the thin kerf that it has. This is also a combination blade, which means that you can use it for ripping as well as crosscuts. It is a 10-inch blade and has 40 teeth allowing it to cut work pieces that are up to 2 inches thick.

For any table saw with less thatn3 HP, this would be the perfect blade. The interesting bit about the teeth is that there is a face hook at every 20 degrees and an alternative tooth bevel at 15 degrees. This makes it easier to feed the stock to the blade and achieve smooth and clean cuts. The 5/8 inch arbor is also another feature that ensures you are achieving superior cuts.

This is one of the blades that are quiet even when cutting tough applications. The tensioning of the blade is excellent as it is done by hand. There are also carbide teeth that are hand-brazed. The ATB tooth style contributes to exceptional blade performance. If you want an all-round blade, this should be your choice.

Forrest WW10407100 Saw Blade Features

  • The blades are tensioned by hand and hand-brazed, which is an assurance of quality.
  • This combination blade has 40 teeth and can be used for both crosscuts and ripping tasks.
  • It comes with a very thin kerf and this prevents wood loss when making your cuts it will save up to 1/5 inches of materials.
  • You will get ultimate pull control, with this blade and this reduces any jumps and tears outs.
  • With this blade, it is easier to feed the stock to the table saw and this moderates the cuts made.

Oshlun SDS-0630 6-Inch 30 Tooth Stack Dado Set with 5/8-Inch Arbor

Oshlun SDS-0630 6-Inch 30 Tooth Stack Dado SetIf you are into specialized cuts, like dado cuts, then this would be the best table saw blade to go for. This is a 6 inch dado stack that has a total of 16 pieces. It comes with a 5/8 inch arbor and 30 teeth. This means that you will be able to produce clean and smooth cuts, with utmost precision. This is a blade that allows you to make cuts from ¼ inches to 29/32 inches.

The comprehensive set comes with all the relevant instructions that you would need to make use of it. The blade will be sharp most of the time and you can easily make cuts on different types of materials, including hardwood, plywood, softwood and many more. The blades have tips, which are precision ground, with C-4 micro grain tungsten carbide.

There are full body chippers, which are included on this set and as such, you will hardly experience any vibration. Without the vibration, it means that the accuracy of the cuts will not be compromised. The shim set is included to facilitate fine adjustments so as to make the desired cuts, with dado blades. The blades will not tear out the workpiece making it a convenient choice.

Oshlun SDS-0630 Dado Set Features

  • The blade tips have C-4 carbide, which ensures that they are always sharp.
  • There is a shim set, which is critical in that it will help you make fine adjustments for desired cuts.
  • There are 16 pieces of blades that are included in this dado stack, which gives you value for your money.
  • This is a 6 inch blade and has 30 dado teeth, a 5/8 inch arbor and 5 chipper teeth allowing you to cut through different materials.

DEWALT DW7670 8-Inch 24-Tooth Stacked Dado Set

DEWALT DW7670 8-Inch 24-Tooth Stacked Dado SetDEWALT DW7670 8-Inch Stacked Dado Set is another type of specialized blades for the table saw. This is loaded with a 24 tooth set and has laser cut plates, which are meant to ensure optimal accuracy in the cuts. The blades come with micro-grain carbide teeth, which give you the best cuts. This is the right dado set for experts, who desire quality cuts. This is a high-quality set and will be a great addition to your blades.

You will love the fact that the blade has been designed in such a manner that it will reduce any form of splintering. There are 4 teeth chipper, which are included and they will be useful in ensuring that you are getting flat bottom cuts. The shims, on this set, are made of stainless steel and this makes micro adjustments possible, along with the width.

There is a heavy duty storage case that has been included as part of the DEWALT DW7670 8-Inch Stacked Dado Set and this means that you will keep your blades safe. This prevents any form of damages on the chipped teeth. With 8 inches of diameter and a hook angle of 12 degrees, this is a great stack to have. The tooth grind is ATB+R and has a maximum speed of 7000RPM.

DEWALT DW7670 8 Inch Dado Set Features

  • This set has amazing features and teeth that ensure that you do not get splintering or tear outs.
  • The shims allow you to make micro-fine adjustments and these are made of stainless steel.
  • The stack has a set of 4 tooth chipper, which will be useful to avail flat bottom cuts, which are smooth.
  • You will get a heavy duty storage case, which will keep your blades safe and well protected.
  • The laser cuts plates are made of high quality and heavy gauge material and this gives you the assurance of clean cuts.

How to Align or Adjust Table Saw Blade?

Having the best table saw blade is great and this allows you to accomplish a whole lot. All you need is to learn how to adjust the blade. You need to be sure that your stops are set correctly. To align your table saw, you need to do the following:

  • Have the 1/1000 inch feeler gauge and a precision triangle. Hold the triangle in an angle that is vertical and perpendicular to your blade.
  • The feeler gauge eliminates any gaps. You need to ensure that the 90-degree angle is running into the blade.
  • Use the 45-degree corners to confirm the accuracy of bevel stops. If you need to adjust the level, refer to the manual.

Here are the steps to adjust the blade:

  • Turn off the table saw and disconnect it from the power outlet, so as to prevent any accidental start.
  • How to Align or Adjust Table Saw Blade
  • Bring the blade to the highest cutting position of the table saw.
  • Remove the blade guard assembly
  • Make the bevel stop loose and set the blade to 90 degrees, after which you should tighten the bevel lock.
  • Mark the right side of the blade tooth, using a pen.
  • Rotate the marked tooth to 0/5 inches above the table
  • Set up the combination square in that it will touch the marked tooth
  • Check the blade’s alignment
  • Adjust the blade if it does not align. To do this, you need to use the adjustment screw.
  • Return the blade guard to complete the process of adjustment.

If you are looking for more information about How To Safely Using A Table Saw & Avoid Danger go here right away

Frequently Asked Questions

Q: What causes my blade to have a heavy cut?  

A: When you experience a heavy cut, there are a number of factors that could cause this. In most cases, this may be due to a blunt blade or a very low cutting speed. You should also check the hook angle to ensure it is correct.

Q: My cuts are wider than the blade kerf, what is the cause?  

Best Table Saw Blade

A:  This is mainly caused by a misaligned blade. Ensure that your blade is always aligned to the fence and workpiece.

Q: What causes the neck of my blade’s teeth to break?

A: When you set the blade very high on the table saw, this may cause the neck to break. The blade height should be set in that the gullets are on top of the work piece.

Q: Why does my blade vibrate when it gets to maximum speeds?

A: This may be as a result of poor mounting of the blade to the table saw. You should also confirm that the arbor and the collars are clean and free from dirt. Slippage of your drive belt may also cause this.

Q: What is the resin coating on my blade?

A: The resin coating on your blade may be as a result of heat buildup. This is caused by very high speeds, which causes too much heat between the blade and work piece.  Using the wrong blade may also cause this.

Final Recommendation

There you have it! With this guide, you will be able to pick the right blade to make your desired cuts. There are different types of blades as you have realized and you go for the one that serves your needs effectively. When you have the right blade, you will enjoy the experience that you will get with your table saw. I have reviewed some of the best models on the market and I highly recommend the Freud 10″ x 40T Next Generation Premier Fusion General Purpose Blade as the best table saw blade. If you have found this guide to be useful, please let us know and also share it around your circles.

4 Best Table Saw Push Blocks to Buy in 2020

best Table Saw Push Blocks

best Table Saw Push BlocksThe table saw is a great tool and it allows you to complete a number of woodworking tasks. However, this is also one of those tools that end up causing serious injuries. With a table saw push block you will be able to reduce the chances of the accidents happening. You will achieve accurate cuts, without compromising on your safety.

There are so many different types and styles of push blocks. As such, you may not be able to make the right decision. I have done some extensive research and I will share with you how you can buy the right block for your table saw.

Why did Table saw Push Block and Its Advantages?

The table saw push block is one of the best safety accessories that you can use with a number of power tools. This is different from the push sticks as you will just need a single block and not several sticks. Push blocks are made from blocks of wood, which are quite thick and they will have a handle to hold down the workpiece.

The main advantage is that you will be able to make accurate cuts while protecting your hands. This allows you to push the work piece through the blade conveniently. When using a table saw push block, you will achieve clean and accurate cuts and not at the expense of your safety.

Best Table Saw Push Block On the Market In 2019

Anytime you go to the market to buy a table saw push block, you may be confused by the various models available. With the reviews below, I have made it easier for you to be able to pick a push block that will serve your needs, efficiently.

Image Product Price Details
Kreg KMS7102 Table Saw Precision Miter Gauge System GRR-RIPPER 3D Pushblock for Table Saws $$ Check Price
Incra MITER5000 Miter 5000 Table Saw Miter Gauge MLCS 9167 Safety Push Block $$ Check Price
Incra MITERV27 Miter V27 Miter Gauge Gripper(TM) 200 Advanced System with 1/8 $$ Check Price
DELTA Deluxe Miter Gauge POWERTEC 71009 Safety Push Block and Stick Package $$ Check Price

GRR-RIPPER 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

GRR-RIPPER 3D Pushblock for Table Saws Whether you are professional or a hobbyist, the GRR-Ripper 3D is one of the best push blocks that you can come across. You will actually feel safer when working with your table saw, with this push block. This model comes with 3 directions of force, which are meant to give you the best protection. The downward direction force is critical as this will prevent any form of kickbacks. The inward force holds the stock down, while the forward force controls the feed rate to the blade.

This push block also comes with 3 legs and this will dictate the direction force. The good thing with this model is that it assures you of the best protection and it comes with built-in support. This offers you exceptional stability and all the cuts that will be made will be accurate. Even with the very small cuts, you will be able to use this push block and not worry about injuries.

The GRR-Ripper 3D gives you the liberty of making adjustments to the angle and the handle to suit your comfort. You can use the table saw with this table saw push block to make rip cuts of ¼ inches. You will achieve this cut with a lot of accuracies and no need to adjust the fence. It is an adjustable push block and quite versatile. You can use it on plastic, aluminum and wood materials as well.

GRR-ripper 3d push block  Features

  • There 3 directional forces that you will get with this model, downward, inward and forward force movement.
  • The downward direction force will prevent any cases of kick pack as the workpiece will be firmly held down, without any wavering.
  • This model is fully adjustable and as such, it is quite versatile and can be used with different types of materials and surfaces.
  • Besides the table saw, this push block can be used with band saws, jointers, routers and so many other tools.
  • You can make rip cuts that as thin as ¼ inches when using the push block as it comes with a moving blade guard protection.

MLCS 9167 Safety Push Block and 5-Piece Stick Package

MLCS 9167 Safety Push BlockOne of the things that you should never compromise on when looking for a push block for safety. When you are assured of your safety, you will be able to execute amazing cuts. The MLCS 9167 is one type of push block, which will give you the best safety that you can ever think of. This is a very light model as it only weighs 2.2 pounds and this allows you to handle the push block easily.

This comes as a set with 5 pieces, which makes it quite comprehensive and it will serve your needs in the best way. Using this model you will hold down your workpiece firmly and take it through the blade to achieve the desired cuts. You can use the saw with different saws and other tools for various applications. The model has rubber pads which you will use and achieve a firm grip on the workpiece that you hold down.

The notch-stick has a slender profile and this will be ideal when you need to cut very thin pieces of stock. This is a push block that has been designed to keep your hands at a safe distance from the table saw cut blade. It is made of heavy-duty plastic, which makes it strong and durable.

MLCS Safety Push Block Features

  • The MLCS 9167 push block comes with rubber pads that will give you an amazing and firm grip when holding down the workpiece.
  • You can use the block for various tasks and applications as it comes with 5 different pieces.
  • The shape of MLCS 9167 will ensure that your hands are at a safe distance and will allow you to hold down the work piece while pushing it through the blade.
  • This model is made of heavy duty plastic that is of high quality so as to ensure longevity and solid construction.
  • There is a notch-stick, which has a slim profile and this is useful when you need to make cuts on thin pieces of wood.

Gripper(TM) 200 Advanced System with 1/8

Gripper(TM) 200 Advanced SystemIf you are looking for an advanced table saw push block, then the Gripper(TM) 200 is a great option to consider. This is one of the best accessories that you can use with different tools for your woodwork project. The good news is that this push block will work with Jointers, table saws, band saws as well as routers among other tools. You will get an assurance of quality cuts, without exposing your hands to risky injuries.

The Gripper(TM) 200 assures you of the best accuracy and ultimate control when you are making cuts. You will not risk your hands coming into contact with the cutting blades. There a number of components that can be adjusted on this model and are also detachable. This makes it convenient as you can control its functionality. You are fully assured of your safety and can use the push blocks to make cuts that are up to 1/8 inches thin.

The Gripper(TM) 200 comes with a 1/8 inches leg, which makes it efficient in offering protection. There are non-slip pads that are grooved onto this model and these will give you a firm and secure grip when guiding your workpiece. The adjustable spaces will give you versatility and enhanced control when working with the stabilizing plates.

Gripper Push Block Features

  • The Gripper(TM) 200 has an adjustable spacer that works with the stabilizing plate to give you more functionality.
  • This is a model that comes with several components that can be detached and adjusted to suit your needs.
  • The non-slips pads that are included will give you great power to hold down the workpiece and guide it through the cutting blade.
  • You have the option to choose between the right and the left tunnel depending on your preference.
  • The Gripper(TM) 200 has a center leg balance support and this allows you to make cuts at different angles without compromising on your safety.

POWERTEC 71009 Safety Push Block and Stick Package, 5-Piece

POWERTEC 71009 Safety Push BlockLast but not least, I want to bring to your attention to the POWERTEC 71009, which is quite versatile. This comes as a safety block and sticks package with 5 pieces. You will be able to get enhanced protection with this tool when you are making cuts on your workpiece. All the features that are included in this model are meant to give you the utmost protection.

There is one long push block and 2 others that are shorter and this is part of what you get in this package. This allows you to choose the right type of push block depending on the type of project that you have at hand. In addition, you will also get a push stick and a V-stick, which means that there is no project that you will not be able to handle.

The ergonomic design of the POWERTEC 71009 is what has made it be ranked as the best option for both DIY enthusiasts as well as professional woodworkers. There are rubber soles that have been included and this is efficient in holding down the workpieces when guiding them through the blade. This is a great set to have and it eliminates any dangers and risks that may arise when using the table saw.

POWERTEC Safety Push Block Features

  • The POWERTEC 71009 is a great push tool that will prevent dangers like kickbacks and other issues that may affect your safety.
  • It comes in orange color and this makes it easy to maintain visibility when you are making cuts.
  • The POWERTEC 71009 comes as a set with 5 pieces which include 2 short blocks, a long push block, a V-stick block as well as a push stick.
  • It is made of high-quality plastic, which makes it long-lasting and durable.
  • The rubber soles will hold down the stock, firmly when you are cutting and this ensures accurate cuts.

How to Choose the Perfect Push Block?

There are so many types of push blocks that you will find on the market. In order to make the right decision and buy the right table saw push block, there are some factors that you should consider. With the right push block, you will enjoy a whole lot of safety and neat cuts. Here are some of the key considerations that you should bear in mind when shopping for push blocks:

Quality of ConstructionTable Saw Push Blocks

We have already established that most of the times the push blocks will be made of thick wood blocks. It is worth noting that there are different materials that are also used in making the blocks. You should ensure that the construction is solid such that you can be able to apply the required amount of pressure on the workpiece without breaking it. The construction is what ensures that you achieve the safety that should be given by the blocks.

Features Included

You can easily make a push block in your home and start using it. However, this may not be as effective as buying professional ones. When looking for a push block, pay attention to the features so as to establish that you are getting the best protection. Check out the handle as well as the other features that are included in the push block. Besides the basic features, check if there are any additional features that are included and what role they play. This ensures that you will only pay for the features that are necessary.

Compatibility with Table Saw

There are some push blocks that will work well with some types of table saws. You should ensure that you are getting a model that works well with your table saw. Please note that the push blocks may be used with other tools as well and as such, it is best to find one that is versatile and can be used with different types of tools.

Consider the Design

The overall functionality of the table saw will be determined by the design. You need a push block that will be able to hold down the workpiece, with minimal effort. The design should also be such that it does not end damaging the stock when holding it down. Look for a model which will fit into your hands perfectly and has an ergonomic grip.

Frequently Asked Questions

Q: Do I have to buy a grab block separately?

A: In most cases, a good number of models come with a grab block. As such, it depends on the type of push block that you choose to buy. In the event that you do not have one, you can buy a grab block, which will attach to your push block.

Q: When using the push block, do I need to remove the blade guard?

A: Yes, if you want to use the push block effectively, you will need to remove the blade guard from your table saw. This is what gives you the space that will allow you to hold down the workpiece.

Q: Do the rubber soles of push blocks wear out and can I replace them?

A: Definitely, the rubber pads will eventually wear out. However, the time it takes for them to wear out will depend on the frequency of use. The good news is that you can easily replace them. All you need is to find the right soles for your push block.

Q: What is the right size of the legs on a push block?  

A: The right sizes of the legs for your push block will depend on your needs. When shopping for a push block the common leg sizes are ¼, ½, and 1/8 inches. There are advanced push models that come with the 3 leg sizes.

Q: What is the best way to use my push block?

A: Since there are different types of push blocks, you will get details on how to use them from the manufacturer. There are some that come with instructional videos as well. Before using a push block, you should ensure that you know how to use it.

Final Recommendation

Push blocks are some of the key accessories that you should ensure that always have. The blocks will ensure that you are making clean and accurate cuts, but most importantly, without compromising your safety. I believe that you have learned valuable things and you can choose the right push block to use. From the models that I have reviewed, I recommend the GRR-RIPPER 3D Pushblock for Table Saws. This is the best table saw push blocks that come as a package with 5 pieces. If you have found this guide to be informative and useful, please share it with your friends and loved ones.

Best Table Saw Taper Jig Reviews With Buyer Guide 2019

POWERTEC 71035 Table Saw Taper Jig

Table Saw Taper JigWhen it comes to creating fine finishing, you may want to make tampered cuts and this is where the table saw taper jig comes into play. This is an essential accessory to use with your table saw.

As fate would have it, there are so many different taper jigs that you will need to use with the table saw. This makes it quite a tall order for you to pick the right one. I have made this work easier for you and have reviewed some of the best taper jigs on the market.

Why Saw Taper Jig and Its Benefit

The table saw is one of the power tools that are gaining popularity by the day. The taper jig is an instrumental accessory that will make it easier for you to make detailed cuts, with optimum precision. This allows you to make deep cuts, which will run parallel to the grain.

Some of the benefits of tapering jigs are that they are used to make table legs and other cuts. You can customize them to make unique cuts to serve your needs. If you need to make rip cuts at an angle, this is the accessory to have on your table saw.

With these simple pointers, you should be able to pick the right tapering jig. Now let’s go straight into the reviews:

What’s the Best Table Saw Taper Jig?

If you need to improve your woodworking finishes, a tapering jig is essential. Since there are so many on the market, I have made the work easier for you and reviewed some of the best models. These reviews will help you buy the right table saw taper jig:

Image Product Material Price Details
Kreg KMS7102 Table Saw Precision Miter Gauge System POWERTEC 71035 Table Saw Taper Jig Aluminum $$ Check Price
Incra MITER5000 Miter 5000 Table Saw Miter Gauge Fulton Table Saw Taper Jig Aluminum $$ Check Price
Incra MITERV27 Miter V27 Miter Gauge Big Horn 19066 Taper Jig Aluminum $$ Check Price
DELTA Deluxe Miter Gauge WoodRiver Taper Jig Aluminum $$ Check Price

POWERTEC 71035 Table Saw Taper Jig

POWERTEC 71035 Table Saw Taper JigThe POWERTEC 71035 is one of a kind table saw taper jig that allows you to make angled cuts with ease and it comes with a metal hinge to make work easier. With this model, your table saw becomes quite versatile as you are able to make a number of unique cuts. The tool is sturdy and will hardly break when you are using it. This will make it possible to achieve clean and accurate cuts.

There is a stop that has been included on the back side of the POWERTEC 71035 and this is quite convenient. A number of tapering jigs lack the ability to hold the stock in place and this stop will serve this purpose. There are aluminum extruded guide bars, which enhance the efficiency of the accessory. This is not only durable, but it is stable enough when making cuts.

Whether you use your right or left hand, you will find the jig to be ideal for your needs. It also comes with a graduated scale, which allows you to measure up to 3 inches per square taper cuts and 15 degrees. With a weight of only 2 pounds, you will easily control it to make your desired cuts.

Powertec 71035 Taper Jig Features

  • The POWERTEC 71035 has a graduated scale allowing you to make taper cuts of up to 15 degrees and 2 inches per sq. foot.
  • There is a backside stop, which will hold your workpiece in place.
  • There are extruded guide bars that are on this taper jig and this enhances the strength and stability of this model.
  • With a weight of only 2 pounds, you will easily handle and control the jig to make your preferred cuts.
  • It is made of high-grade aluminum, which makes it strong and durable.

Fulton Table Saw Taper Jig

Fulton Table Saw Taper JigFulton Taper Jig, that will revolutionize all your woodworking projects. It has been rated as one of the best jigs for table saws and it will be certainly worth your money. For all the slight angular cuts, this is the tapering jig to use and it will enhance the performance of your table saw. With the Fulton taper jig, you will easily be able to cut tapered cuts.

The overall length of this jig is 24 inches and this caters for most tapered cuts. You can use this with a rip fence so as to make accurate cuts, effortlessly. It is made of industrial grade aluminum and this gives you the assurance of a strong and sturdy tapering jig. It is designed to be used for both right hand and left hand operations.

The built-in scale is an amazing feature to have as it makes it easier to take measurements of your cuts. It is easy to use and you can make measurements of up to 15 degrees and 3 inches per square foot. This jig is completely adjustable and as such, you will make tapered cuts at the angle that you prefer.

Fulton Taper Jig Features

  • This is one of the models that are easy to use and supports both right and left hand use.
  • There is a convenience of a built in scale that will allow you to measure taper cuts of up to 15 degrees.
  • This taper jig is made of aluminum, which is quite sturdy and will last for quite a long time.
  • The model is completely adjustable, allowing you to make cuts at the preferred angle.
  • With a length of 24 inches and a backside stop, you will get excellent support for your workpiece.

Big Horn 19066 Taper Jig

Big Horn 19066 Taper JigThere are so many reasons why the Big Horn 19066 taper jig ranks as the best table saw taper jig. This is known to be one of those models that are built to last as it is made of high quality aluminum. With this model, you will be able to make high quality and professional taper cuts. There is a metal hinge that is conveniently placed so as to ensure that it does not break when you are using it.

There is a graduated scale that is included and this allows you to make measurements of 3 inches per sq. foot or 15 degrees of taper. This is a versatile jig as it also comes with T-slotted sides and provides you with an adjustable stop for the work piece. The jig is 24 inches long and this supports most of the tapered cuts. You enjoy the convenience of the design as it can be used for both hands.

The Big Horn 19066 taper jig comes with grooved outer edges, which are essential to the sturdiness of this model. With a very light weight of only 2 pounds, handling it will be easy when making your cuts. The workpiece will be securely held in place when working with this jig.

Big Horn Taper Jig Features

  • Big Horn 19066 taper jig comes with a built in graduated scale that allows you to make tapers of up to 15 degrees.
  • This is a model that is built to last as it is made of high quality and professional grade aluminum.
  • With the strong metal hinge and grooved edges, you will use this jig with the confidence of knowing that it can never break.
  • There is hand reversible operation and as such, you can conveniently use it for both right and left hands.
  • It measures 24 inches long and has a weight of 2 pounds, making it the perfect jig for your table saw.

WoodRiver Taper Jig

WoodRiver Taper JigAre you making tables, chairs or any other furniture that needs perfect finishes?  Then you will need to have the WoodRiver Taper jig. The table saw is a great tool to have, but with this taper jig, you will make it even better. The jig allows you to cut tapers in a short while and in total accuracy. This is certainly a great addition to have in your table saw accessories.

This jig allows you to make taper cuts of up to 15 degrees of 3 inches per square foot. It comes with guide bars, which are strong and durable as they are made of aluminum. It is easy to assemble and use as you can use it, irrespective of the hand that you use. It has a graduated scale that is built in to facilitate easier measurements. You will make tapers with so much ease, with the help of this jig.

There is a push handle of 2 5/8 inches, which has been included on the guide bars. The WoodRiver Taper jig has an ergonomic design and serves the interests of both professionals as well as beginners. This is a model that is worth your money and will improve all your woodworking projects that need tapered cuts.

WoodRiver table saw Taper Jig Features

  • The amazing design of the WoodRiver Taper jig allows it to be used for both right hands and left-hand operations.
  • There are aluminum guide bars that are included and also 2-5/8 inches push handles that will give you excellent control.
  • There built-in graduated scale is essential and allows you to make cuts of up to 15 degrees and also 3 inches per square foot.
  • This model is made of high-grade aluminum and this assures of sturdiness and durability.
  • The WoodRiver Taper jig is 24 inches long and as such, all the common tapers will be accommodated, without a problem.

How to Choose the Perfect Taper Jig?

When you go out shopping, the intention should be to buy the best table saw taper jig. Here are some of the key factors that will help you pick the right accessory to use:

  • Construction MaterialTable Saw Taper Jig Reviews

Anytime that you go out shopping for any table saw accessory you need to pay attention to the construction material. In the case of taper jigs, you should consider those that are made of aluminum as they are durable and will hardly rust. With solid construction, the jig will work effectively.

  • User Friendliness

Being able to work with the taper jig with great ease is essential. You should look for one that is easy to assemble and use on your table saw. This is one of the ways that you will enhance productivity. As such, do a proper background check to see to it that you find a model that is rated as user friendly by customers.

  • Size and Weight

Each tapering jig has measurements and this should be paid attention to. Look at the specific dimensions to ensure that it works with your table saw and serves your needs. In addition to this, it is imperative to consider the weight. You do not want to overwhelm yourself with a very heavy model as this can be difficult to control.

  • Design and Features

Find a jig that has an appealing and functional design. Some of the essential things to look out for include the grip and the handle. Also, ensure that you find a design that favors your strong hand. There those that are designed for left-handers and right-handers.

How to Use a Taper Jig on a Table Saw?

In the past, when you needed to make tapered cuts, you would have to use your hands, which took quite some time and compromised on the accuracy. Fortunately, the taper jigs have made this much easier and they will allow you to make cuts, at an angle, effortlessly. With the right table saw taper jig, you will be able to make repeated cuts that are consistent. Here is how to use your taper jig safely:

  1. Lay the Cutbest Table Saw Taper Jig

The first step is to lay out the cut that is to be made. This line should be marked on the piece of wood. This will allow you to set the taper jig easily and accurately. If you are making identical cuts, you need to lay out on the first piece only. Once the jig is set, you can make the other repeated cuts with ease.

  1. Aligning the taper jig

You should make sure that the cut line is parallel to the rip fence. This allows the jig and fence to hold the work piece in place. To align the jig, ensure that the saw is off and disconnected from power. Place the taper jig against the fence with the work piece against your jig. Adjust the angle of the jig to achieve your preferred position. All these should be done before starting the saw.

  1. Making Tapered Cuts

Stand to the right of the fence and if you have limited space, secure the jig and stock together. Now push the jig and the workpiece through the saw blade and do not force it. Allow the blade to make the cuts. Eventually, the cut workpiece will fall on the other side of the blade.

Table Saw Taper Jig FAQs

Q: What is the maximum size of work piece can I cut with a taper jig?

A: In most cases, the taper jigs are 24 inches in length, and this allows you to cut any board that you have. All you need to check is the space available in your workshop and the overall weight of the board being cut.

Q: How do I attach the jig to the table saw?  

A: Please note that when using a taper jig, it will not attach to the table saw, at any point. The only thing that it attaches to is the work piece that you are working on.

Q: Will I be able to make repeat cuts consistently with the taper jig?  

A: Yes and the good news is that you will only need to align the jig for the first piece you cut.

Q: Which size of a tapering jig should I buy?

A: This is a question of the type of work that you have. However, with the 24 inches long taper jig, you will have an easy time working with the jig. This accommodates most taper cuts.

Q: Can make smaller angles with my taper jig?

A: Depending on the model that you have, you should be able to make smaller angles. Most of them are able to measure 0 to 15 degrees.

Final Recommendation

If you have come this far, then you must have gathered adequate information to help you find the right jig. I have reviewed some of the leading models, on the market and I believe that this should give you clear guidance on the one to pick. I have also shared some crucial pointers to help you with your purchasing decision. From the models that I have reviewed, I recommend thePOWERTEC 71035 Table Saw Taper Jig as the best table saw taper jig. If this guide has been of great help to you, please let us know. Feel free to share this with your family and friends and help them as well.

Best Table Saw Miter Gauge Reviews and Buying Guide

kreg precision miter gauge system

Table Saw Miter Gauge reviewsIf you are able to make accurate cuts, then it woodworking becomes more interesting. The table saw is one of the greatest tools that you can have to achieve such cuts. However, that will not be enough on its own and this is why you will need to have a table saw miter gauge. This is a convenient accessory especially for joinery and shelving tasks as it allows you to make angular cuts, accurately.

There are so many different types of miter gauges on the market and this can be somewhat confusing for a number of users. The essence of this guide is to make the process of choosing a miter gauge easier for you. I will share with you all the relevant details about this accessory and even review some of the top rated models to help you with your decision. Please read to the end and you will find this information quite valuable.

What is the Best Table Saw Miter Gauge?

In the same way that there are different models of table saws, you will find quite a handful of miter gauges on the market. I have taken the time to review a number of them, which rank highly on the market. With this table saw miter gauge reviews, I believe that you will be able to identify one that serves your needs, which will help you with your purchasing decision. Here are the top rated miter gauges for you:

Image Product Price Order
Kreg KMS7102 Table Saw Precision Miter Gauge System Kreg KMS7102 Table Saw Precision Miter Gauge System $$$ Check Price
Incra MITER5000 Miter 5000 Table Saw Miter Gauge Incra MITER5000 Miter 5000 Table Saw Miter Gauge $$$ Check Price
Incra MITERV27 Miter V27 Miter Gauge Incra MITERV27 Miter V27 Miter Gauge $$ Check Price
DELTA Deluxe Miter Gauge DELTA Deluxe Miter Gauge $$ Check Price

Incra MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

incra miter 5000This Incra miter gauge brings together all the best features that one would be looking for on a miter gauge. You will effortlessly be able to measure and make accurate angular cuts with this particular model. The good news is that is compatible with most of the major models of table saws, which makes it be versatile. The clamping abilities on these models are quite impressive as it will make it easier for you to secure the workpiece as it easily attaches to the table saw.

Whether you are a professional or a novice, you will love this table saw miter as it has an almost zero error of margin. As such, you will be able to make predictable cuts with the help of this particular model. The other bit that you will love is the fact that it is durable as it is made of aluminum. There are 3 panels and 2 T tracks on the special sled and are all made of aluminum, which is light, yet long lasting.

With the zero clearance, you will be able to align the miter gauge with the main sled without a problem. It also has a telescoping fence that has a capacity ranging from 36 to 64 inches. There are slots that have been included on the right side of the sled and this will help you to secure the miter gauge to the table saw.

Incra miter 5000 Features

  • The Incra miter 5000 is made of aluminum and has a compact design, which makes it easier to carry.
  • The markings are laser cut on solid still and as such, they will be permanently visible and never fade out.
  • This tool has a 364 lock solid stop feature, which as 0.5 degree increments and this facilitates exact measurements and cuts.
  • The clamping feature is also incredible as the miter gauge will attach to the saw and this allows you to make cuts with the utmost precision.
  • There are 2 T tracks and 3 panels and this allows you to make angular cuts with ease as the miter gauge has exceptional angle control.

Kreg KMS7102 Table Saw Precision Miter Gauge System

kreg precision miter gauge system When you have a good miter gauge for table saw, you will love every moment that you spend with your table saw. The Kreg miter gauge is loaded with a myriad of features, which are designed to make it easier to achieve angled cuts, with the utmost precision. The biggest advantage is that this model is being set and as such, there would be no need for calibration. The precision lens cursor enhances your visibility and allows you to make accurate cuts.

There are positive stops, which are spaced at 0, 10, 22 1/2, 30 and 45 degrees. These will help you make use of the miter gauge whether you ate an expert or not. With this model, you have the liberty to make adjustments to 1/10th of a degree. The Vernier scale included in the tool is easy to use and does not require any calibration as well. You will be able to this gauge with different types of table saws.

The Kreg precision miter gauge has a fence that is made of anodizing aluminum, which is quite stable and durable. Whenever you need to make repeat cuts on your workpiece, this is the accessory to use as it will save you so much time. There is a swing stop that will grant you maximum control when using the miter gauge.

Kreg KMS7102 Features

  • This model comes with a Swing Stop feature, which is essential as it gives you great control.
  • There are 5 positive stops, which have also been included at 0, 10, 22.5, 30 and 45 degrees, to allow you to make cuts at the desired angle.
  • The Kreg Precision miter gauge system has a micro-adjuster, which allows you to make adjustments to 1/100th
  • The markings are laser cut on solid steel and you will be able to see them clearly for as long as you use the tool.
  • This model is preset from the factory and there will be no calibration needed. You can use it straight from the box.

Incra MITERV27 Miter V27 Miter Gauge

Incra MITERV27 Miter V27 Miter GaugeWith this miter gauge, you will have so much liberty as it comes with a total of 27 angle stops. This is not an accessory that works with the table saw only, it will work with band saws, disk sanders and router tables among others. This is a versatile model and you will easily be able to achieve accurate cuts. Their incremental controls are essential when it comes to the use of the tool.

There is a Flip Shop Stop feature and this comes in handy when you have to make repeat cuts. This table saw miter gauge has incredible precision when you are making the cuts. The angle stops have 5 degree increments and ate across the 180 degrees range. The miter gauge offers +/- 60 degrees miter cuts and includes special stops of +/- 22 ½ degrees. There are an AngleLock indexing feature and a GlideLock miter bar, which enhance the accuracy of cuts.

The dual pivoting flip arms of this model are meant to give you the exact accuracy that you are looking for. You will enjoy a total of 4 expansion points, which will adjust with zero side play and anti-frictional travel. This is what keeps the bar stable when you are making cuts. This model comes with universal mounting brackets.

Incra miterv27 miter Features

  • There are universal mounting brackets that are included on this miter gauge to attach to the saw easily.
  • This model gives you 27 angle stops and will give you exceptional control for precise cuts.
  • The 4 expansion points can easily be adjusted to a level of zero play on the bar. This means that it will be intact and not wobble when in use.
  • The compact design and minimal size of the miter gauge make it easier to use and even carry around.
  • There is a flip shop stop as well as dual pivoting flip arms, which are features that make this to rank as a versatile model.

DELTA Deluxe Miter Gauge

DELTA Deluxe Miter GaugeYou cannot go wrong with the Delta Deluxe Miter gauge as it is one of the most reliable models that you will find on the market. This is one of the tools that have a great emphasis on user comfort without compromising on the strength that it delivers. This is a gauge that works for any miter groves of 3/8 x ¾ inches. If there is something that you can be confident about this tool is the accuracy that it delivers.

This miter gauge works with any saw that comes with a T-slot miter grove. It is ranked among the heavy duty accessories as it is made to of solid construction. There is a washer that has been included in the package and as such it will not tip when being used on surfaces with extended edges. The adjustable guide bar will fit like a glove to the miter slots, leaving no room for play.

There are positive stops at all the common angles and as such, you will easily make your cuts. The oversized grips will give you maximum control of the gauge and enhance your comfort. There are solid markings, which are permanently visible and this allows you to mark angles and make cuts with ease. The miter gauge will fit on majority of miter grooves without a problem.

Delta Miter gauge Features

  • This model comes with very large grips and as such, you will enjoy great control and maximum comfort.
  • The miter gauge is designed in such a manner that it will fit into most miter groove slots conveniently.
  • The tip resistant washer is useful as it makes sure that the miter gauge is steady and not wavering when in use.
  • There are positive stops, which have been placed at all the common angles and as such, you will achieve accurate cuts with ease.
  • It works with any saw that has a T-slot groove and as such, it is a versatile miter gauge to have in your possession.

How to Determine What Table Saw Miter Gauge Is Best For You?

After going to the reviews above, you must have an idea of the miter gauge that you can buy. However, there are some specific considerations that you may want to put to mind so as to find the best table saw miter gauge. Here are some of the main considerations:

  • Movement of the StockTable Saw Miter Gauge

A good miter gauge is one that will eliminate any movement of your workpiece as well as friction. This means that you should pick one that has a high quality sled.

  • Capacity

Before settling for any model, check the range and the capacity. This will determine the type of tasks that you can undertake with your gauge.

  • Compatibility

Which saws and tools will the miter gauge work with? Knowing the compatibility of your miter gauge will help you with your decision.

  • Ease of Use

Most of the modern models will be calibrated from the factory and this makes it easier to use and even adjust. You need to go for a model that does not take the whole day to set up. This will increase productivity.

  • Construction

In this case, you will need to pay attention to the material that has been used in making your miter gauge. Go for those that are made of aluminum or steel as they tend to be durable. It would also be imperative to check the design and size.

How to Use Table Saw Miter Gauge Properly?

The saddest bit would be having a miter gauge table saw and not making full use of it. Learning how to use the miter gauge properly will help you make a wide range of cuts and in a safe manner. I have put together a simple guide that you can follow so as to make the right cuts with your miter gauge.

  • Making Square Cross CutsBest Table Saw Miter Gauge

The simplest and easiest cuts that you can make with your miter gauge. In order to make these cuts, you will need to have the miter gauge set to 90 degrees. There is not complexity in making the square cross cuts as and this is the beginning point for most people. Once the miter gauge is set to a right angle, slide it all the way forward until you can see the front area. When making this marking, ensure that the table saw is not connected to power.

Ensure that there are no gaps that have been left between the miter gauge and the saw blade and then lock down the workpiece. You can use your preferred clamp system, but be sure that the stock is secure. At this point, you can slide the miter gauge backward. Place the workpiece against the flat part of the gauge and use a pencil to make your markings. Now you can connect the table saw and make your cuts using the miter gauge to guide you.

  • How to Make Angled Cross-Cuts

There is a whole lot of similarity between the angled cuts and the square cross cuts. The process is the same, with the only difference being the angle at which you will set the miter gauge. In this case, it will be set at a 45 degrees angle. With the miter gauge set at that angle, all you need to do is follow the same steps as with the square cross cuts. Clamp your workpiece and make the relevant markings to make the angular cuts. Only connect the table saw to power when you are ready to make the cuts.

  • Making Specialty Cuts

You can also use the miter gauge to make specialty cuts. In this case, you would need to have a miter gauge and a jigsaw. Using a wood strip will give you more stability. Place the wood strip facing the miter gauge. In most cases, specialty cuts will be done on longboards. To make these cuts, attach your jigsaw to the miter gauge and make the cuts as guided by the manufacturer.

Final Recommendation

The miter gauge is a must-have accessory for professional woodworkers as well as hobbyists who want to make angled cuts. If you have come this far, you must have gathered some solid information to help you make a good purchasing decision. As long as you can land on the right miter gauge, it will be very easy to make the desired cuts.

I have reviewed a number of models in this guide so as to help you with your decision. From the models I have picked, I recommend the Kreg KMS7102 Table Saw Precision Miter Gauge System as the perfect table saw miter gauge to have. This is a model that is quite versatile and will help you achieve accurate cuts. If you have found this guide to be useful, please share it around and also leave a comment. We would love to hear from you.